contract cateringprocurementmulti-site

Contract Catering: One Supply List, Forty Sites

By Kwickway Products · November 10, 2026 · 6 min read

Contract Catering: One Supply List, Forty Sites

A contract caterer's problem is not any single site. It's that the portfolio contains a corporate head office restaurant, a university residence hall, a hospital tray line, a stadium, and a client's board dining room. And one purchasing structure has to serve all of them.

That makes tabletop consumables a standardisation problem rather than a product problem.

Why the usual approach fails

Site managers buy locally. Left alone, forty sites generate forty supply decisions, inconsistent presentation, and no purchasing leverage.

Central lists get ignored. A list that doesn't fit a site's actual equipment gets quietly replaced by whatever the local distributor stocks.

The sites genuinely differ. A hospital tray line and a client boardroom have almost nothing in common operationally. A standard that pretends otherwise fails at both ends.

The resolution is to standardise on lines and specifications, not on a single SKU, and to let each site draw the sizes its equipment requires.

Build the list around equipment, not sites

Survey trays, not locations. Most portfolios discover three or four distinct tray types across sites assumed to be identical. A mix of inherited equipment, client-owned assets, and whatever arrived with the last mobilisation.

For each distinct tray: measure the flat interior floor, not the outer rim, and subtract 3mm per dimension. That's the target size.

Then group sites by tray type. That grouping, not geography, is what the supply list should follow.

A portfolio list that covers most operations

Line Sizes Typical sites
Rectangular tray liner 10"x14", 14"x14", 16"x22" Tray lines, staff restaurants, bussing
Banquet oval tray liner 19-5/16" x 24-1/4" Hospitality, events, client dining
Coaster 3", 3-1/2", 4", 5" Boardrooms, hospitality suites, bars
Doilies 13 sizes, 6" to 15" Plated service, client dining, afternoon service
Ramekin and condiment liners Four sizes each Tray lines, condiment stations

Five lines. All supplied in white, silver and blue, by the case, minimum one case.

Where a client site runs purpose-built equipment, which happens most often in healthcare and in older institutional kitchens, a custom die cut to the exact dimension is usually cheaper across the portfolio than carrying a near-miss SKU that gets trimmed with scissors at site level.

Use colour to enforce the standard

This is where contract caterers get more value than single-site operators.

White under plated food. Silver for client-facing and hospitality service, where presentation is contractually part of what you're delivering. Blue as the coding colour, by site, by client, or by service type within a large contract.

Colour-coding is the cheapest way to stop service ware migrating between contracts in a shared warehouse, and it makes a standard visible rather than theoretical. A site manager can see at a glance whether the right product is in use.

The specification to write into the standard

  • Material: thin film foamed polystyrene, non-porous
  • Use: single-use. No cleaning or sanitation procedure required for the item in any site's food safety plan
  • Grip: prevents sliding on smooth surfaces for up to 30 degrees while maintaining a low vertical release force
  • Maximum service temperature: 158°F (70°C). Not for direct contact with hot plates, heat lamps or heated holding equipment
  • Food contact: manufactured from polystyrene complying with FDA 21 CFR 177.1640
  • Recycled content: up to 80% post-industrial. Die-cut in Toronto, Ontario, and manufactured in a solar-powered facility
  • Coverage requirement: full coverage of the tray's interior floor, no exposed rim, no trimmed edges

That last line is the one that keeps a standard intact. A scissor-cut liner is jagged, collects residue, lifts under a plate, and looks wrong in front of a client. Writing it explicitly out of standard gives site managers a reason to order the right size rather than improvise.

Ordering across a portfolio

Count consumption per site type, not per site. A staff restaurant tray line, a hospitality suite and a client boardroom produce completely different ratios. Averaging across forty sites gives a number that's wrong everywhere.

Set reorder points centrally, draw locally. Products ship by the case with a one-case minimum, so a spare case per site is inexpensive insurance against the improvisation above.

Pre-order for contract events. Client entertaining, graduations, conference seasons and year-end functions cluster predictably.

Supply route

Direct gives you a single relationship across the portfolio and custom sizing where client equipment demands it. If you are a distributor rather than a caterer, the distributor programme is the relevant route.

Through your incumbent distributor keeps tabletop on the same invoice as the rest of your disposables and uses freight you already pay for. We operate a distributor programme with protected North American territories, so if you have a broadline or disposables partner, ask whether they carry the line.

Cross-border portfolios

Contract catering is a North American business before it is a national one. The large groups hold contracts in both countries and buy against shared specifications, so a standard written for US sites has to be orderable at Canadian ones without a second vendor approval.

That works here because it is one manufacturer. Canadian sites are served directly from the Toronto plant, covering the Greater Toronto Area, Montreal and Vancouver. US orders ship from Toronto and our Buffalo, NY hub, with regional distribution through New York, Chicago, Miami, Las Vegas and Los Angeles. Same specification, same case packs, same custom dies on either side of the line, which means one approved vendor record rather than two.

Start with the equipment survey

Everything downstream depends on it. Request free samples in the sizes that survey produces, and send us dimensions for any site running purpose-built equipment.


FAQ

How many liner SKUs does a contract catering portfolio need? Usually five lines: rectangular tray liner, banquet oval, coaster, doilies, and a ramekin or condiment liner. Sites draw the sizes their equipment requires from within those lines.

How do you stop site managers buying locally? Standardise on lines and specifications rather than one SKU, make sure the list actually fits each site's equipment, and use colour-coding so compliance is visible. A standard that doesn't fit gets replaced quietly.

Do liners require a sanitation procedure at each site? No. They are single-use and discarded after service, so no cleaning procedure needs documenting in any site's food safety plan.

Can we get custom sizes for client-owned equipment? Yes. Custom dies are cut in Toronto. Across a portfolio, one custom die is often cheaper than carrying a near-miss standard size that gets trimmed at site level.

Can one specification cover both US and Canadian sites? Yes. It is a single manufacturer, so the material, sizes and case packs are identical in both countries. Canadian sites are served directly from the Toronto plant, including the Greater Toronto Area, Montreal and Vancouver.

What temperature are the liners rated to? 158°F (70°C). They should not be placed in direct contact with hot plates, under heat lamps, or inside heated holding equipment.

Can we buy through our existing distributor? Yes. We run a distributor programme with protected North American territories, so an incumbent broadline or disposables partner can carry the line.